| FAQ |
| Q. Is it easy to re-ink PRE INKED RUBBER STAMP |
| A. Preinking of PRE INKED RUBBER STAMPS is an easy process simplified by the provision of a re-inking diagram. Follow it carefully, keeping in mind that a rubber stamp requires 2-2 drops only and should not be over-inked. 12-hours should be allowed to elapse after re-inking before you add more ink. |
 |
| Q. Is it possible to change the ink colour of Rubber stamps? |
| A. Changing the ink colour of your stamp is not recommended
as ink formulas for each colour are different and are not mixed well.
Mixing colours result in blurry impressions as the ink holding pores
of rubber stamps can get blocked when a different ink formula is used.
True colours cannot be obtained by mixing different formulas e.g.
a black ink formula mixed with red will not render a true red. |
|
| Q. Does one have to use KIVI Magic ink only? |
| A. Yes, we stress that you always ensure that you are using MAGIC INKS as all ink brands are not the same. The ink formula
of another brands may not be compatible with MAGIC FLASH. If you have
an question as to which ink to use, please do not hesitate to ask
us. |
|
| Q. Which is the best way to clean my PRE INKED Rubber stamp? |
| A. Occasionally, lint and paper dust may adhere to the surface
of your stamp. To clean, simply, take a piece of cellophane tape and
press it across the rubber stamp with your finger. When you remove
the tape, you will remove the residue well. As you stamp, you will
find the clarity of the impressions made by your rubber stamp as clear
as the day it was bought. |
|
